Results 1 to 8 of 8

Thread: 5 years in the making...

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default 5 years in the making...

    I started this saber about 5 years ago. It's TCSS parts (a long choke and two short extensions for the body) with part of the TCSS recharge port disks and a 3d printed chassis to hold the speaker and an NB2 (what was new when I purchased the original parts.) I etched the shroud this week. The entire thing is weathered with acrylic paints in black and some rusty browns and there is a little bit of green on the shroud, too.

    49731831128_ab268e4b74_z.jpg

    49731831088_b091ffe38c_z.jpg

    49732377961_ecc944b777_z.jpg

    49732378006_5a7b27fb15_z.jpg

    49732378026_2e3738433b_z.jpg

    49732700037_f8209c7abf_z.jpg

  2. #2

  3. #3

    Default

    Thank you.

  4. #4

    Default

    Very nice etching.

    http://s6.photobucket.com/albums/y23...0Saber%20Hilts

    From Wikipedia: "Internet Explorer slows down GIFs if the framerate is 20 frames per second or higher and Microsoft reports that Google Chrome and Safari also slow down some GIF animations."

  5. #5

    Default

    Sweet saber. Nice work with the etching.


    Greenie

  6. #6
    Jedi Padawan Starwinder's Avatar
    Join Date
    Jul 2012
    Location
    Coruscant (aka Washington, D.C.)
    Posts
    584

    Default

    Nicely done!
    --------------------------Cadence--------------------------

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •