Results 1 to 2 of 2

Thread: Crossguard Custom Quillions

  1. #1

    Default Crossguard Custom Quillions

    Working on my first trident/crossguard that I picked up during the May the 4th event last year. Wasn't happy with the included quillions so designed and printed new ones using clear nylon...had to test in a different saber with a rig, but happy so far. Will drill further into the tip, and adjust the next print, and should be set. Bridge Nylon is supposed to be pretty tough, so while it wont be blade strength, it should absorb some random blows....interested in feedback if others have done this as well!

    Edit: Hope I have this right now for sharing images!

    https://imageshack.com/i/pmdBhpTlj

    https://imageshack.com/i/pniTVcAej

    https://imagizer.imageshack.com/img923/9582/iTVcAe.jpg
    Last edited by scott; Yesterday at 08:29 PM.

  2. #2

    Default

    I printed a design in both pla and petg. They are both quite adequate.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •