-
Parts Check
Hi! I'm Grey, I'm pretty new to the saber community.
After taking costs and such into account, I've decided that my first saber will be a CFX/Neopixel custom build. If anyone would like to just double-check the parts I have listed below to make sure I'm not missing anything, it would help a ton. Other than wires, a chassis, and a blade, here is the complete list:
-- CFX
-- US Dark Initiate V5 (empty)
TCSS PARTS
-- Pre-Soldered Pixel PCB Hilt side connecter and 7 pins
-- MWS Standard Style Momentary Switch
-- MWS Long Latching 16mm AV switch
-- MWS Panasonic Li-Ion 18650 3.7V 3400mAh PCB
-- MWS Recharge Port
-- 2W 28mm Bass Speaker
Side Question: For CFX/Neopixel sabers, should I be using 2 momentary switches, 2 latching switches, or one of each? Haven't really been able to find anything that answers this in the forums. Any help with this is appreciated.
-
You need one of the 15A batteries for a pixel blade. the 3400mah cell will not work.
It's momentary switches. Read the manual for the board.
Last edited by jbkuma; 01-01-2021 at 08:02 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks