-
Yellow 5mm LED/switch resistor question
I believe the 20mA DynaOhm would work perfectly, however, would a different resistor get me more of an "Amber" color? Does this type of LED work that way?
OR, could I "rebuild" the switch with a 5mm RGB accent LED and run the coloring through the sound board?
I could use any/all advice. MTFBWY
-
it's possible to do switch surgery. I convert AVs to pixels. It is unlikely you will get a different color out of the LED. You can try just changing to a resistor that would give you less power, but it will almost certainly just be dimmer.
-
Thanks. I may end up getting one from the Shop as back-up. I found essentially a "kit" version of the 5mm LED/switch (another site, forgive me) and will likely try to install a RGB LED from the Shop and wire the RGB as an accent or parallel with the blade.
-
The RGB switch in the shop isn't an independent channel LED, it's a color changing LED.
-
And..... crap. Thanks for saving me some serious ranting and throwing things. I saw the four leads and got ahead of myself.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks