Hey all,

I really like the idea of the Modular Wiring System, as I used to try to do that on my own back in the day with quick connects. However, Im a bit confused as to how its all supposed to wire together.

For instance, Ideally, I would like to have a setup with a MWS Tri-Cree LED, Li-On Battery, momentary switch(no light), and the momentary to latching converter. Ive drawn up a little schematic, and I was hoping someone could give me a hand with how the LED and Resistor connect to it all. Also, since there is no MWS Resistor, I figured I would need to splice one into a JST cable, is that correct?




If someone could draw some connector lines on mine, (or draw a new schematic, if im totally off) I would really appreciate it.

Thanks all.