Teensysaber Neopixel parts list

[EyeBr0ws]

Hi guys.

I'm planning to do a Neopixel-based install in my Graflex 2.0.

My parts list is as follows. Besides wires, have I missed anything?

• NeoPixel PCB connector and pin set
• 7/8"" NeoPixel Hilt Side Adapter
• 7/8"" Thin Walled NeoPixel Blade Adapter
• 2x 1m WS2812B 144led RGB Neopixel
• Blade Diffuser Film
• 20AWG Silicon Wire for Neopixel
• Clear Heat shrink tube for Neopixel
• Foam tube for 7/8" and 1" thick walled tubes
• 470ohm Carbon Film Resistor
• 7/8 White Blade Round Tip

• Teensyboard kit from KRSabers.
• Knight Chassis Part 1 - Main shell
• Knight Chassis Variant 1 - Part2
• Adapter Prizm5.1 to TeensySaber V3
• GRFLX 2.0/2.1/2.5 Clamp Sw Holder with suspension
• Momentary Tact Tactile Push Button
• 3.7v Li-ion Battery Charger
• Keeppower 3.7v 18650 Battery
• 2 x 8-32 x 1/8″ Set screw
• 2.1mm DC recharge socket
• True Premium Bass Speaker 28mm