Greetings! ( my first build )

[Ish]

Greetings, I'm Ish. New to the forum and new to saber land. In fact, I've never even posted or blog b4. Ive started on my first build on a saber that I'll put together over the next few weeks thanks to this forum and The Yin.



It will be Jedi saber with a green blade. I was thinking of calling it Knight Strider or Fragment. IDK. Let me know what you think! Or help with the name and add ur thoughts.


I will add pics as I go.

Thanks
-Ish

[Machinimax]

Alright! New guy! Now about your initiation....(Gets out the wig, rubber chicken and unicycle). Hahaha just kidding! Welcome! We all look forward to your first build.

[Forgetful Jedi Knight]

Welcome to the forums! We look forward to seeing what you some up with.

[shmoetech]

Welcome Ish, looking foward to seeing your build.

[Ish]

Thanks guys!

[Darth Ryo]

Welcome Ish!
Enjoy your time around, tons of good stuff to read over here.
And of course, looking forward to see what you'll come up with

[madmaxx]

your first step into a larger world......lol welcome

[Starwinder]

Welcome Ish! This is THE place to be to get started. Looking forward to seeing what you come up with!

[Ish]

Update:
SaberBuilder_render.jpg


MWS Pre-Wired Petit Crouton Sound Module V2.0
7.4v Li-ion 2600mAh 18650 Battery Pack
LED Engin LZ4 10W Multi Color (RGBW)
Acrylic crystals
16mm Anti Vandal Latching Green Ring Switch
2.1mm Power Jack
16mm Anti Vandal Momentary Nickel Plated Switch
Power Xtender™ 2.0
2.1mm plug adapter for smart charger
3.7V-14.8V Li-Ion Smart charger
Premium Speaker
2 Wire quick connector
Copper MHS LED Mount/Heatsink
Red LED indicator
Green LED indicator

[Boj-Vaati Mau]

To the forum, welcome, you are!
Your build looks good however you'll need to go for a longer extention to get you switch and port to fit. If you go for a Double Male Threaded Connector on the pommel end of a 4" Double Female Adapter (I'm guessing you're looking at Box 11, if looking at Box 14 you can go with a 3") you'll be good. The Double Male Adapter is too short and you have to drill into the threads to get you switch and port in. Where are you planning on putting the Accent LEDs? You'll need a Blade Retention Screw and Drill Tap service for it, Drill/Tap for the Activation box screw...

Your parts list will look more like this;

MPS Pommel style 4
4" Double Female Grooved
Double ended male threaded connector style 1
4" Double female threaded connector
Ribbed grooved / Choke Combo
Screw on LED blade holder style 25
MHS "new style" Heat Sink V2
Activation box style 11
2.1mm Power Jack
Machined button for Covertec clip
16mm Anti Vandal Latching Green Ring Switch
16mm Anti Vandal Momentary Nickel Plated Switch
MWS Pre-Wired Petit Crouton Sound Module V2.0
Power Xtender™ 2.0
2.1mm plug adapter for smart charger
3.7V-14.8V Li-Ion Smart charger
Premium Speaker
2 Wire quick connector
7.4v Li-ion 2600mAh 18650 Battery Pack
Red LED indicator
Green LED indicator
Acrylic Chassis Disc for PC 2.0 and 14500 side by side pack
1" Thick walled Polycarbonate 40" long
Shouldered 1" thick walled blade tip with reflective disc
8-32 x 1/8" Set screw Blade Retention screw
8-32 x 3/8" socket head Covertec screw
Box 11 Mounting holes service
Drill & Tap Hole for Blade Retention screw
Drill & Tap Hole for Covertec Knob
Gorilla Glue to hold the blade tip on
clear poly gift wrap for blade diffusion material

I'm sure I'm missing something but that's the bulk of it. Pretty ambitious project for a first saber, good luck!