The stock paint job and electronics left a lot to be desired on what really is a pretty good hilt for large people. My hand wraps around it just fine.
The stock paint job and electronics left a lot to be desired on what really is a pretty good hilt for large people. My hand wraps around it just fine.
"Mistakes are our greatest teacher."
Hello,
Hilt SCC80 1 1/4 PVC, Grip 50mm medium wall heat shrink tube, T12 for the end cap. Coil .062 solder.
Electronics all TCSS TRI CREE BBW, Cool white for the internal. NBV4 28MM PREMIUM, guarded momentary sw.
Paint Krylon Fusion Nickle and satin black
Thanks and regards
DSCN3577.jpgDSCN3573.jpgDSCN3585.jpg
Last edited by donpauleyboy; 01-05-2018 at 04:25 AM.
Hard work never hurt....but why take a chance.
US Aeonv4
NBv4
18650 3400mah
16mm counter sunk AV switch
TCSS MPS #6
28mm bass speaker
Running Dark Meat, Hoth and VadeR1
ED6D9135-8D1B-4A9B-AEB7-5F3C53C350DA.jpg
MHS Darth Nihilus with fixed chassis, NBV4, Crystal Chamber Reveal:
Running Annihilation in first 2 banks, and Necro in 3rd. White FOC.
"Mistakes are our greatest teacher."
Hi everyone
https://youtu.be/OqbXwHpi0hM
Hard work never hurt....but why take a chance.
Nice work donpauleyboy! PVC shroud on sinkpipe?
"Mistakes are our greatest teacher."
Let me know if Works in Progress are not allowed and I'll take it down.
After a lot of sketching and fiddling I finally bought a bunch of MHS parts and played a bit. After some edits I think I have a direction I'm happy with. The paper mock ups are going to be used as templates to cut out sleeve material. Wish me luck with that, hehe
saber.jpg
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
May the Fyre be your Friend.
Almost done with a complete overhaul of my 2004 Lightech Industries Viper Defender. It's finally ready for the guts. 11 pin Neopixel and CFX. Hilt is done.Top.jpgMiddle.jpgBottom.jpg
Thanks Tim for all of your help!
Bookmarks