-
Neopixel Ignition Speed
I just recently finished my first saber using the NBV4 and now I'm messing with settings to try and make it perfect. The #1 thing I am having trouble getting to work is the ignition speed. I've messed with the qon/qoff speeds and that doesn't seem to do anything. I saw this video https://www.youtube.com/watch?v=iz4nuRYLkYM and he gets the blade to do what I would like. Any thoughts? I'll post my current settings down below.
//Nano Biscotte 4.0
drive=500,0,1000
fdrive=1023,0,1023
focmix=101
resume=0
shmrd=210
shmrp=6
shmrr=13
shmr%=0,50
focd=200
focp=10
focr=10
foc%=0,80
qon=0
qoff=0
flks=3
flkd=20
pulsed=0
pulsel=0
lsfadeon=0
lsfadeoff=0
lightstick=0
omnisabers=0
-
Jedi Council Member
Is this a config file from one of the banks or the override file?
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
It's for one of the banks
-
Jedi Council Member
See if there is a won and off in the override.txt file. If there is, either modify those, or remove the lines completely if you want different speeds per bank.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
There is not a won file in the override. Here's the override settings.
## Override File
vol=4
beep=40
rebootd=1250
motg=500
muteoff=0
gate=30
hclash=700
hswing=220
offd=200
swing=200
clash=150
deep=15000
ledstrip=130
ls0=14
ls1=28
-
So I figured it out. My problem was assuming on a scale of 0-3000 that 1500 was a good starting point. The speed I was looking for was around 150 so i wasnt seeing any changes when i edited the qon
-
Hi there! you said 150 but was the qon or qoff or both? what numbers did you end up using for both?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks