-
NBv4 - No Flash on Clash
I've wired up a few NBv4's and never run into this problem. Everything's working great except there's no flash-on-clash. Any common reason for this?
-
Jedi Council Member
Have you checked through the configurations to make sure you have everything set properly?
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
Yes - it's the same as I've used before (with a different color in each bank):
//Nano Biscotte 4.0
drive=1023,0,0
fdrive=1023,1023,1023
focmix=001
resume=0
shmrd=210
shmrp=6
shmrr=13
shmr%=0,50
focd=200
focp=10
focr=10
foc%=0,80
qon=0
qoff=0
flks=3
flkd=20
pulsed=0
pulsel=0
lsfadeon=0
lsfadeoff=0
lightstick=0
omnisabers=0
I've got no motion-sounds - no clash - nuttin. Are there other configurations I should be looking at?
Last edited by CDSabers; 12-10-2018 at 09:38 PM.
-
Jedi Council Member
No. Please take a good, high quality, closeup of the top of your NB board. It sounds like a component may have possibly sheared off.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
-
Jedi Council Member
Thats very fuzzy. Any way to take a clearer picture, and a little closer?
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
Yeah, sorry - here it is:
board2.jpg
-
Jedi Council Member
Also, can you do the underside of the board?
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
Here you go, Dr. Let me know when to turn my head and cough.
board3.jpg
-
Jedi Council Member
Ha ha. I don’t see any apparent hardware issues. I’ll ask Zook to take a quick look. I’ll take a look at your config later when I get a chance to sit down and concentrate, unless someone else beats me to it.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks