So after the completion of my first successful build, of course I want to turn my attention to build #2.
Once more I ask for checks on my wiring as I want to add a recharge port (and battery module) to the build. I also really liked the use of the MWS wiring harness as it let's me remove the chassis for easier access. I've modified it's use a bit in this build but hopefully I've done so correctly.
As always, any corrections, pointers and comments are welcome.
Thanks everyone and MTFBWY!
Screen Shot 2018-04-25 at 9.49.30 AM.jpg
https://imgur.com/a/RuR2X1K
Bookmarks