-
Can I replace a pico crumble with a Prism soundboard?
Does anyone with more technical knowledge know whether this would work? I have an RGB saber powered by a Pico Crumble V1 and I want the option to customise my saber more. So if I add an Aux switch to my setup, is that the only change to my saber that I would need to make? From the looks of it, both boards use exactly the same recommended parts and so is it as simple as de-soldering the current connections, adding another switch and soldering it to the new board?
Here are the specs for my saber
LED: Tri CREE RGB XP-E2 LED
Red – Forward Voltage @ 1000mA = 2.6V
Green – Forward Voltage @ 1000mA = 3.1V
Royal Blue – Forward Voltage @ 1000mA = 3.1V
Battery: Xtar Protected 18650 battery 2600mAh 3.7V
Speaker: Veco 2W (3W max) 8 ohm bass speaker
Thanks for your time
-
Jedi Council Member
As long as you have the room, and additional parts (switches, proper chassis, etc,) you should be able to.
I've also deleted the several other copies of this post. Please don’t do that in the future. Just make one post.
Last edited by Forgetful Jedi Knight; 12-09-2017 at 07:17 AM.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
Thank you
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks