Is it possible to use the PLI (Power Level Indicator) and the Crystal Focus 7.5 together?
Is it possible to use the PLI (Power Level Indicator) and the Crystal Focus 7.5 together?
Yes. The PLI can be used with most setups, as it typically gets wired to the battery directly.
If you want to use the CF PLI mode for the accent leds, then it's not going to wire up without some (fairly extensive) modifications.
We all have to start somewhere. The journey is all the more impressive by our humble beginnings.
http://led.linear1.org/1led.wiz for the lazy man's resistor calculator!
http://forums.thecustomsabershop.com...e-to-Ohm-s-Law for getting resistor values the right way!
So I can use the PLI with the CF and use the CF accent led points to run say a few leds to an exposed crystal chamber for example?
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Okay. Another newbie question.
If I am wanting to use a Tri or Quad Cree LED with the Crystal Focus 7.5 and have truly customised colour mixes for my blade settings do I also need to install the Colour Extender?
Correct. You'll want a Color Extender if you want to have better color mixing
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Bookmarks