Hey all,
IRL hasn't let me post or build in a while, it's good to be back!
The Force Awakens fast approaches and my wife has demanded her new saber finished. The parts are assembled and ready to go, all that remains is a wiring check and I'm good to build.
I've done a couple of builds before but never with a recharge port or soundboard, so this is mainly to make sure they're both hooked up right.
I'm using a single 18650 3.7V cell and White Seoul P4, calculations tell me I don't need a resistor on the main LED so I've left that off. I'm also using a pre-wired NBv2 and the diagram doesn't show all the connectors.
Siren_Wiring-02.jpg
Thanks in advance!
Rei
Bookmarks