Results 1 to 4 of 4

Thread: New saber build

  1. #1

    Default New saber build

    Ok first off i have been rummaging through the forums like a mole through my back yard and i have learned a lot of things that are very helpful and some that are best left where i found them. I have assembled a parts list and a wish list for adding sound and FOC at a later date as but i think i have every thing i need and a few things for the 2.0 and 3.0 versions of my planed build Untitled.jpg i was hoping to do something like this i took it off of someone who i thought had my thought process and i was tracking with them.

    parts list
    1 of: Double ended male threaded connector style 1
    1 of: Hilt Style 5 (7" Fluted double female threaded connector)
    1 of: Machine Standard style switch hole 1.5" from end
    1 of: MHS choke style 1
    1 of: MHSV1 Blade Holder Style 25
    1 of: MHS Heat Sink V3
    1 of: MPS Pommel style 4
    1 of: 3" Fluted double female threaded connector
    1 of: 7.4v Li-ion 1050mAh 14650 Battery Pack
    1 of: 2.1mm Power Jack
    1 of: Activation box style 5 (might use this on a difrent build)
    1 of: 3/4" D-Ring
    10 of: Grip Style 2
    1 of: Red LED indicator
    1 of: Luxeon Tri-Rebel Star (RBlue/RBlue/White)
    1 of: Luxeon 18deg Tri-Rebel Star Lens
    1 of: BuckPuck 1000mA 6-wire
    1 of: Star thermal tape pad
    1 of: Green LED indicator
    1 of: 8-32 x 1/2" thumb screw
    1 of: 16mm Anti Vandal Latching Red Ring Switch
    4 of: 26 gauge wire (sold by the foot) (Black)
    4 of: 26 gauge wire (sold by the foot) (Red)
    4 of: 26 gauge wire (sold by the foot) (White)
    1 of: Kill plug style 5 (None)
    1 of: MPS Clip
    1 of: MPS Insert style 6
    1 of: Rebel Star LED & MHS Heatsink Module
    1 of: BuckPuck 1000mA 4-wire
    4 of: 20mA DynaOhm? Variable Resistor
    1 of: LED "Corbin style" Battle blade 1" OD (36 inches)

    i want to add a; PLI (Power Level Indicator), Petit Crouton Sound Module V3.5, Petit Crouton V3 Color Xtender, and RICE

    is there anything else i will need and if so plese hook me up with links and links to wiring diagrams or y-tube. i learn best by doing not reading or watching.
    SaberBuilder_render MINE.jpg

    Manny thinks lord razor

  2. #2

    Default

    You say you want to add a PC 3.5 and a Power Extender, is this now or later? If it's "now" then things like the buckpuck are not necessary.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  3. #3

    Default

    its later maybe sometime after the first of the year or my birthday in feb

  4. #4

    Default

    OK. Then you would need the Buckpuck to start with.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •