Does anyone know if the nano biscuit with wiring harness will still fit in the chassis disk?
Does anyone know if the nano biscuit with wiring harness will still fit in the chassis disk?
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Thanks. Thats what i thought.
The way the chassis disks where made do not leave enough clearance for the header. I will look into making some compatible ones when I have the time.
Tim
The Custom Saber Shop
I'm guessing you'll have to take a file to the existing disks, or else wait for the new disks to hit the store.
We all have to start somewhere. The journey is all the more impressive by our humble beginnings.
http://led.linear1.org/1led.wiz for the lazy man's resistor calculator!
http://forums.thecustomsabershop.com...e-to-Ohm-s-Law for getting resistor values the right way!
Dremel might allow one to mount the NB in the disc and then solder the header to the NB.
The header sticks out past the disc in the corners. It will probably work if I flip the card so the SD faces out and the header is near the battery but I have not tested that yet.
Tim
The Custom Saber Shop
Bookmarks