Hey everyone, thanks for checking in. I've double checked the numbers, but I'd appreciate it if a fresh set of eyes confirmed these items.

-4AAA battery holder(6v DC)
-Luxeon Rebel Star (Amber) (171lm @ 700mA 3.2v - Run at 700mA)
8deg lens + holder
-4.7ohm 5w resistor
-Heatsink module for 1" ID tubes
Star thermal tape pad
-1" Thin walled Trans White PolyC 40" long
bullet tip

Screenshot of cart for good measure

I'm mostly concerned about the resistor for the Rebel. I used the calculator here, as well as another calculator.
The one here recommends a 2.2ohm, but is calculating for a 1400mA current.
The offsite recommends a 4.7ohm when I input a 700mA current.

Is there anything I've missed or anything that I'm reading wrong? Thanks very much.