My new MHS build with CF6+CeX

[fragrax]

I proudly present my latest MHS based custom saber!

For my third MHS project I wanted to incorporate a shroud element into the design. I also wanted to take advantage of the new color mixing capability of the CrystalFocus v6 with the added CeX board while still leaving room for a visible crystal chamber. So it was a bit tricky to incorporate all these elements into the design considering that the hilt is barely over 11'' long, but I think it came out resonably well.

I'd like to thank Tim from TCSS for the great work he did on the hilt and also Erv for the help in sorting out some technical problems I had with the soundboard.

Specs:

- Crystal Focus v6.10 + CeX
- Tri-rebel RGrB LED
- 2W speaker
- 7.4V 1400mAh li-ion battery pack
- Visible crystal chamber
- Real quartz crystal illuminated by a 5mm RGB LED wired to match blade color
- Illuminated red ring AV switch
- R.I.C.E. port
- 7 segment blue bargraph


Fonts:
(all purchased at www.saberfont.com)

- Fates, Bespin II, Vader, Korriban by Madcow
- Form II - Makashi by Lord Blako
- Resblade by Novastar












A couple install pics
(Sorry. I have little patience for pictures during an install! )



Video