My 2nd Lightsaber Build log. Luke AHN Graflex Lightsaber.

[hotwingz00]

Hey Dudes~~
Hello all.
Thanks for the kindly sharing experience and advice for my 1st saber, I learn Soooo many things.

The 1st crystal chamber I made it looks "ok" but there is a Big fault is..there is no space for wire go through>,<. ( Dude, You are right....You told me so.....>,<)
and the LEDEngine RGBW not as bright as i think.........

This time i use more time to research and design the crystal chamber, make it simple/solid/one-piece and i think its good looking.
Switch to be LED Strip Blade system this time to see "What Can I do", I hope the blade can be very bright.
Here is the spec :

Luke ANH Graflex Lightsaber,
Graflex 3Cell flashgun Hilt. ( Well....still waiting for the postman.....)
Bubble strip from " The Parts of Star Wars"
Graflex 1" Blade Adp from TCSS.
LED "TCSS style" Battle blade 1" OD, with modify for Led Strips.
2X14500, 2W 8ohm Bass Speaker.
Crystal Focus LS V6.5 ( Thanks Erv!! )
Planning to use 2X Blue LED Strips on 2 sides,( 72pcs Led strip X2 ),
with 1 strip white LED at middle ( should be 36 pcs ) for FOC.
Aura quratz crystal chamber.
12 pcs red 3mm LEDs[Accent LEDs#2,3,4,5,6,7]
at the motor position(6pcs) and speaker position(6pcs).
1 white Accent LEDs hiding behind the Aura Crystal for FOC effect.
Some old HDD spacer discs and motor parts for the crystal chamber.
CF Switch setting will go for (0-2) 2. but already bought
Pololu Pushbutton Power Switch SV.......seems noneed to use,
because CFLS V6.5( and CF V6.5 also) can set the Switch mode.

Youtube Chamber FOC testing :
http://www.youtube.com/watch?v=lZn2B...ature=youtu.be

And here is more photos on my FB =D
https://www.facebook.com/inventor.wa...4654240&type=1
20130716_234806.jpg20130727_000528.jpg20130727_022637.jpg20130729_001229.jpg20130727_030735.jpg