SaberSound 1.0 new soundboard prototype

[airsoftmode]

Hello everyone, im pleased to anounce the completion of my very own soundboard. The prototype has been created and programed, and the first production run will be completed withen one month.

When planning this board I realized that there are allready 2 high end soundboards on the market in the form of the ultrasound and crystal focus boards, however anyone hoping to get a mid level board either has to dissasemble an fx saber or install a cheap economy board. The SaberSound 1.0 is an anwer to that dillema.

The SaberSound 1.0 features

Higher volume than an fx board
10 clash sounds, and 10 swoosh sounds
An input voltage of 3.8-10v so it CAN drive luxeon V leds
Momentary style button, press once to turn on, hold for 2 seconds to turn off, so no accidental shut offs!
Demensions 1.1 Wide 1.5 Long .25 Deep
And best of all, the price will be set at only 59.99!

Here is a video of the prototype wired up to a luxeon III red its just a short video to intraduce everyone to the board. When the production run is completed I will do another video, and have a board installed in a hilt so you can hear the resonance.

Test VIDEO outside hilt
http://www.youtube.com/watch?v=qVLOn_NWpSg

Resonance test inside hilt VIDEO
http://www.youtube.com/watch?v=P4VuTkE7rpk