Here's my design
All my hilt pieces and most of the parts.... (2) 700 mA buckpucks = 1400 mA , red-o luxIII, 5 deg optics, SW-616 Sound board from radio shack fx construction set, DPDT switch, radio shack speaker, and 4 aaa battery pack.
Soldered the DPDT slider to the pins on the back of the switch thats soldered to the board.
cut down the plastic housing the board was in originaly, cut and capped the onl led wires , and hot glued the clash sensor in place.
Here's my buckpuck setup.
here's both together.
Stay tuned... more to come
Bookmarks