The battery definitely sounds like it was empty.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Either you have it wired wrong, OR you have a short somewhere.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Found out the LS6 board has a short. But I have a backup board. I’m assuming I killed the battery from charging it too long. Have another battery on the way. I’m probably going to take a break for a few days to avoid pulling any hair out trying to find the issue.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
The new battery showed up and I took a break from the electronics to cut out my crystal chamber. But even with the new battery the blade won’t light up, and the the neopixel connector still only lights up red, no animations, no color change, just a static red, and now I’m completely lost on how to get it to work.
Sounds like it could be a configuration issue. You would have to post your config.txt file.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
//CF-X Configuration - FOR LEDSTRIPS
debug=0
logport=0
vol=50
menuvol=50
menugest=0
trackgest=0
fontgest=0
beep=40
muteb=0
muteoff=0
sleep=300000
deep=50000
qkignite=0
orient=0
valsnd=0
switch=2
offp=0
offd=200
onp=0
ond=20
swing_flow=360
clash_flow=300
spin_flow=400
smooth_flow=1000
lockup=300
loop=1
shuffle=2
plilh=3400,4200
omnisense=2000
masterpower=100
ledstrip=133
auxstrip=0
tridentstrip=0
accentstrip=0
dragstrip=20
strippower=1111
ls1_timings=350,700,24,1,3,0
ls2_timings=350,700,24,1,3,0
## Motion Settings
gate=50
smooth_gate=50
hclash=850
hswing=450
hslash=400
hhybrid=550
hforce=300
hfclash=650
hstab=500,-20,20
hspin=750
htwist=350
hdrag=500,-90,0
htemp=75
spectrum_mode=3
spectrum_axis=1
field=10,10,10
[profile=0]
pname=standard_profile
wakeup=1
randc=0
blastp=0
random=2
pom=0
pof=0,45,90
twon=0,-90,-45
twoff=0,-90,-45
wagon=0,-90,-45
wagoff=0,-90,-45
swon=0
poi=2
magic=0
saberlock=0
blastm=0
randb=2
shmrd=150
shmrp=12
shmrr=24
shmr%=60,99
focd=200
focp=20
focr=28
foc%=60,99
focl=1
focb=1
focf1=1
focf2=1
focf3=0
fade=0
flks=6
flkd=25
tridentflk=0
flkon=1
flkoff=1
pulsed=0
pulsel=0
on_fade=1
off_fade=1
unstable=0
style_pon=0
style_poff=0
style_preon=0
style_postoff=0
style_blaster=2
style_lockup=1
style_drag=2
style_flicker=0
style_sbright=0
style_accents=0
style_pixies=-1
style_grafx1=-1
style_grafx2=-1
style_grafx3=-1
style_clash=1
style_stab=0
over_pon=0
over_poff=0
pos_lockup=60
size_lockup=40
mapping_color=0
mapping_unstable=1
mapping_lockup=1
mapping_drag=1
mapping_flicker=0
mapping_sbright=0
mapping_move=80,310
mapping_audio=8000,24000
size_flicker=0
pos_flicker=0
force_flicker=127
depth_flicker=127
hcool=70
lcool=0
sparkf=120
sparkd=10
drift=1
mapb=100
mapc=70
refreshfx=12
bladepower=100
omnisabers=0
sbolt=8,20
dbolt=40,810
lbolt=15,30
fbolt=1
rbolt=10
qbolt=50
## [profile=1]
## [profile=2]
## [profile=3]
## [profile=4]
## [profile=5]
This is my config file, after I already tried formatting the sd card and reinstalling the base package
Bookmarks