Results 1 to 2 of 2

Thread: Question on hilts with ID of 1.15"

  1. #1

    Default Question on hilts with ID of 1.15"

    Hey all,
    I want to build a Luke ROTJ hilt, but the extension/choke combo or ribbed extensions have an ID of 1.15". The only board/battery holders or the chassis discs are for 1.25" ID's on the TCSS parts site list.
    What else are my options? Can't trim anything down because of the disc 4-40 holes, battery hole and board are right at the edge or even the board/battery holder. I won't have the required 5" needed.
    Any options or help will be appreciated. Thanks!

  2. #2


    There are disks for 1.15” sections though you’ll basically only be able to use those for the battery.
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts