This is a question on wiring a RGB individually addressable LED ring accient switch on a GHv3 board with a pixel blade, so the accient ring color matches the blade color. If I were wiring an RGB LED blade, I would wire the LED accient ring to the same color LED pad, ie reds to red pad, greens to green pad, etc. But with a pixel blade, the three led pads on the board, red, green, and blue, are bridged together with two wires going to the pixel negative pads. Can I wire all three LED ring accient colors to the bridged GHv3 LED pads, in order to have the switch ring appear the same color as the blade? If not, is there a way, in this situation, to have the switch accient LED match the blade color?
Thanks,