-
-
Jedi Council Member
Welcome to the forums.
Offhand Id say the battery amperage was insufficient. You need a 15A battery to run a setup like that.
In case you werent aware, these forums are attached to a site (The Custom Saber Shop). I removed your links as they go against the forums guidelines.
Also, just so youre aware, that company you mentioned isnt highly thought of in the community.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJKs Down and Dirty guide to Ohms Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
I agree with FJK that battery is definitely a good spot to start. I'm not super knowledgeable with golden harvest. I know that with plecter labs, you have to define the blade in the soundboard settings. Make sure it isn't something similar with that board
-
Thank you for your Input...this is very much appreciated.
In the GHv3 Settings you do have a LED Strip setting where you can define the number of Pixels you are using. I played with these settings but to no effect.
I will get an appropriat battery and try again.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks