Need some help and I am not sure what I am doing wrong here. I am basing my work off this video of with a GGW and NBv4:
https://www.youtube.com/watch?v=v7BdiKfMkro&t=511s

For the GGW, just like the video, I have the two positive green LEDs wired in parallel and attached to one .5ohm 3W Resistor, as the video suggested I also used a .5ohm 3W resistor on my W FOC positive pad. The result is this, the resistor to the FOC positive pad overheats like crazy, to the point that the solder is coming off the joint. I've tried switching it to a 1.2 ohm 3W resistor but with the same result ... is this the result of my beginner soldering skills or am I missing something here?

Also, I am using a 3.7 Trustfire Li-Ion2400 mah battery.