-
yes battery is fully charged. when I change the ledsteip=to 1. as soon as I turn main switch on. power is applied to the board and leds lights up.
with ledstrip=1. it works dependant on the main on/off Switch. activation switch does not control the cree
I got the correct resistors per TCCS calculator.
I have the positive wire of leds wired directly to the positive of the board/battery
I also checked L1 L2 L3 pad on board and I'm getting power @ the pads
Last edited by tw0leftskis; 04-29-2020 at 03:56 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks