Due to the lack of custom entrants, and the relatively low number of entries, the decision has been made to simply combine all the entires together into one group. The voting will last for 2 weeks. So, without further ado...
HERE ARE THE 10 ENTRIES FOR THE 2018 CONTEST.
Saber Name: Regel
Specs:
Prizm 5.1
Led: Tri-Cree RGB
28mm Base Speaker
Brass Tactile Swithces
Custom Switch Box
Custom D- Ring
Leather Wrap
Saber Name: Evan's MHS Windu
Specs:
Nano Biscotte IV with PEX
LED: Cree XPE-2 (Deep Red, Green, Royal Blue)
2W Bass Speaker
Illuminated (white ring) 12 mm momentary switch wired to DS
MHS V6 Chassis w/ user replaceable 18650
In-hilt recharge port
Custom MHS Shroud Accent attached to kill key for display
10 Grip Style 2s in TCSS custom milled hilt
Custom painted sections
Real leather accents (blade holder, hilt, and pommel)
Covertec Clip.
Saber Name: Reliant
Specs: NBv3
GGW Tri-Cree
28mm VECO Bass
18650 w/Recharge Port
Tactile Clamp Switch
Saber name: Evicerus
Specs:
Prizm 5.1
LED Engin RGBW (wired RGB)
RGB LED Crystal Chamber w/Quartz Crystal
28mm Saber Essentials Speaker
Illuminated Momentary Tactile Switch (red halo)
Non Illuminated Tactile Switch (w/stainless steel cap)
PVC Internal Reveal Chassis w/kill switch
Black Cracked Ice Textured Powder Coating w/metal flake
Saber name: Forgotten Hero
Specs:
Nano Biscotte v4
Tri-Cree RGW
2W Bass speaker
Momentary switch (yellow dot)
Saber name: The Panther
Specs:
Prizm 5.1
Led dr/g/rb
Saber essentials 28mm stealth
Tactile switch 17 (2)
Saber name: Resonat Victoria
Specs:
- Custom machined engraving (masterfully done by Tim) quoting Kreia/Darth Traya: "It is a far greater victory to make another see through your eyes than to close their's forever" in Sith Script.
- Blade Holder (25) was customized by me to allow the light leak from the top of the emitter's grooves.
- Custom Black-blue Powder Coat (done by me) contrasts with bare polished aluminum showing some slight wear.
- Custom-made blade plug created from specifically for this saber by me.
- Tri-Cree LED (R/rB/W) -R and rB wired in parallel, White for FoC. White and royalBlue die are both running at full [safe] power, Red is resistor-ed down with 34ohms) giving the blade an indigo color with a very pale lavender/silver flash.
- Nano Biscotte V2 + Power Extender 2.0 for FoC functionality. Primary sound font is Madcow's "Rogue". The secondary font is "Tranquility".
- Quick connectors on most components for ease of changing LED color mix, eventual replacement of any components that wear out if needed, or even swapping the entire chassis out quickly if desired for a future upgrade.
- 2.1mm Recharge Jack (mounted internally, not accessible from the outside of the hilt)
- Li-Ion 18650 3.7V, 3400mAh PCB Protected Rechargeable Battery
- Momentary Guarded switch w/ red button
- 2W 28mm Bass Speaker
- Chasis system is a made of slightly modified TCSS chasis parts.
Saber Name: Luke Variant
Specs:
(First Saber I've Built)
Bladebuilders Soundboard
Green 5mm LED for emitter
2W 28 mm bass speaker
3 AAA Battery Powered
6x6 mm momentary switch
Saber Name: Hai'-Ya - A Graflex Variant
Specifications:
- MHS V1 build
- Nano Biscotte V4
- Adafruit Neopixel strips x2 (144 LED/metre) with requisite Neopixel blade/hilt adaptors
- 1" thick-walled clear polycarbonate blade with foam tube and LED blade diffuser
- 2W 28mm Bass speaker
- MHS speaker mount V6 (18650 battery)
Saber name: Unnamed
Specs:
Pico crumble v1
Tri Cree RGB
20mm bass speaker
Li-Ion 3.7v 18650
2.1mm recharge port
Bookmarks