Hey guys,
So I'm still struggling to actually complete my first build, been almost a year now. I've completed it twice and both times I get no power so I've decided to wire all the components together (NB V3, tri-cree BBW, bass speaker, and switch - I omitted the accent LED and recharge port) externally just to test them out. So here's my question:
I have repeatedly achieved illumination on all three dies on the tri-cree separately, both blues will light up simultaneously when wired together, then when the white is connected to the circuit none of them illuminate. I assume it is a lack of enough voltage to drive them all? If that's the case how is that achieved when they are connected to the board? Does the power extender have anything to do with it?
I currently have everything wired together and when I push the switch...IT WORKS!!!! I get sound, light, and even the swing effect. However, as soon as I give it a tap to activate FOC, the whole thing cuts off Could this be related to the white die, a faulty sound board, or even a low battery? The batter gave me a high of 3.5V with a lot of bouncing around when tested so I don't know if that's a reliable result.
I'd love to hear thoughts on either situation. Thanks guys!
Bookmarks