Main LED not lighting up
So I've gotten everything to function on my CF v.8, but the main LED will not light up at all, No "magic smoke" from the board, no bridging, the led is a blue Rebel Star, Got ahold of the shop and was told to check the settings on my micro sd which I will have to wait on for the time being. Wondering if anyone has any other advice on the matter.
It's the LED settings in the override.txt file. Change or remove them.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Thank you, I will give it a try.
Originally Posted by Forgetful Jedi Knight
Nevermind, I got it running, I actually found one of your old posts with a guy having the same issue
Last edited by Scraftypants; 10-19-2016 at 08:44 PM.
Care to share that link?
I am having a similar issue, but not having any luck. If I remove my FoC wiring, I get no main blade color. However, with my FoC wiring in place, my FoC die is lit as main blade, but main color is acting as FoC.
http://forums.thecustomsabershop.com...-on-CF-8-build
Posting Permissions
Reply With Quote
Bookmarks