Originally Posted by
Forgetful Jedi Knight
You are "overthinking" things. That chart was written assuming that you are using "Alternating Current", which you are NOT. And it also is assuming that you are using 1000 Ft of wiring in between terminal points (Ohms per 1000 Ft.). That chart is meant for commercial power electricity transmission (as used by an Electric Utility Company).
You are using Direct Current (a battery), and (I hope) a lot less than 1000 ft of wire within a saber. Also, if you read the fine print, those are conservative numbers, meant for circuit design only.
Bookmarks