Hi everyone !

(insert boring but nonetheless mandatory presentation)

I'm starting to feel old but I started building sabers in... 2005, 2006 I think ? After being utterly disappointed with my MR FX purchase. I used the first CF, and then I was hooked ! A few sabers were made, until, a few years later, time and priorities didn't align anymore... Last time I built one, I used a CF v4. Anyway. I had lots of parts in advance and I could never throw them out, so in a dusty box they went. Timewarp to today...

(now let's get to the main point...)

So I was cleaning up a bit, and I found some "old" spare parts... and then I found a few CF ! A v1.2 and a v4.0. I quickly wired them up, and lo and behold, they're perfeclty functional... except for the SD cards.

With the recent SW revival, one of my friend's kids went crazy when I showed him one of my old saber (a Vador MRFX converted to CF 1.2...) and I thought I could maybe manage to build him a correct one.

Plecterlabs' website doesn't host anymore the old CF packages, and i tried to search the interwebs but without success. I tried to... erm... "Frankenstein" the SD card contents. I managed to boot the CF so I assume it's working OK (boot sound heard, at least), but I can't go any further without the correct configuration. the config files are too different from the other versions.

The one I'm most interested in is the V4.0 (I think any sub-version would work with it). Bonus hugs if you happen to have a SD card from a V1.2

I don't care for special fonts or anything like that. If it's stock, cool, but as long as it works...

Anyway, thanks for reading !