Hello all,
First build starting soon. Unnecessarily second guessing myself on some of my electronics.
Soundboard: US Obsidian V3 (most immediately available board for this build)
LED Config: Luxeon Rebel Tri-Star, 2x 106lm RED (Max Current 700mA), 1x 313lm LIME (Max Current 1000mA)
Battery: TrustFire 3.7V 2400mAh 18650 Lithium Battery
Two Buckpuck choices: 700mA or 1000mA constant current drivers without dimming
Question: What is my best bet for wiring? I'm thinking I wire the 700mA buckpuck in front of all the LED's in the circuit, and sending that power to the two red LED's (in series) as the primary light source for the saber, and then having the lime FOC LED connect to its appropriate grounding point on the board. Does this sound sane? Another option would be to supply the lime LED with its own resister (no driver) independent of the original buckpuck circuit.
The single Li-ion cell should be enough for the system as well, correct?
I know its a long post, but I also know y'all are much wiser/ more experienced than I am. Thank y'all a ton in advance for answering this.
Bookmarks