I'm new to this but have gotten my PC 3.5 up and running with two auxillary momentary (12 mm green and a red ring) switches and tri-rebel star (RGB) running off of a 7.4v Li-ion 800mAh 14500 Battery Pack.

I used two 20mA DynaOhm? Variable Resistor for each of the momentary switches. Blue die has a 1.5 ohm 5watt; red has 2 ohm, 3watt; green has 2.2 ohm, 5 watt.

boots fine, but after varying amounts of time after either a FOC or swing, it beeps very loudly and then shuts down. I can start it right back up, and again after a short period of time (but varies) after a FOC or swing, it beeps and shuts down again.

any help is appreciated. -Rodney