Originally Posted by
Dogo
I bought an Ultrasabers Apprentice V4 and I plan on basically hollowing it out and replacing most of the electronics. I just wanted to ask if this was a good list of parts I'd need.
Battery Pack/Speaker:
TrustFire Protected 3.7V 2400mAh 18650 Lithium Battery (2-pack)
MHS speaker mount V6 - For 28mm Speakers
18650 Single Cell Holder
2W 28mm Bass Speaker
Switch:
12mm Anti Vandal Momentary White Ring Switch
12mm AV switch bezel for MHSV1
20mA DynaOhm? Variable Resistor
Charge Port:
Switchcraft 2.1mm Power Jack
3.7V Li-ion smart charger with 2.1mm plug
Kill plug style 2
Sound:
NB V2 MWS Header and Wiring Harness
Nano Biscotte V2
MISC:
Lots of wires, shrink tube, etc.
9" Electronics shield for 1.25" ID tubes
---------------------------
Also, I was wondering if you could hook up the Nano Biscotte so that you could just plug the saber itself to a computer instead of having to pull the SD Card itself out to change settings and such.. I know it's possible with sabers, but I don't know if that's a feature of the Nano Biscotte. I read through the Manual, and it wasn't totally clear on that. Was what the μSD symbol was on the NB diagram?
Bookmarks