Well I think before I go doing resistors, I'm wondering if there is a way to tell if the channels are backwards in the bank files. With all the color profiles commented out in the override file, the only led that works at all is the FOC when the aux button is pushed.
EDIT: I have commented out the color profiles in the override, what I get now is the FOC on constantly (as if it was the main) and the two green (wired parallel) only come on when the aux button is pushed (FOC, blaster, lockup).
So now I'm really confused. As I have a blue,blue,white (same led) wired to a PC 3.5 (exactly the same wiring) the color profiles are commented out. Exactly the same as on this green, and it works like a dream.
In fact here is a pic to show comparison in brightness
The blue is on the right, the green the left. That is if my camera is any real good. The thing is to me the green should be equally bright as the blue. Nothing said for color or saturation of light through the tube. Simply that the two boards are set to the same parameters in their individual banks. With the exception of the green, which seems only to operate well with all the color profiles intact in the override file.
I'll be honest this whole experience is getting a little frustrating, I feel as though I'm simply running around in circles.
Bookmarks