I was altering the config files on the SD cards that came with my NB board, to make the two hilts a little more sensitive to swings.

One of the hilts stopped making sounds midway through testing after putting it back together. It worked fine for a bit, then would seemingly try to make a bit of noise, then nothing. I swapped the SD card into the other hilt, works like a charm. So does its original card.

Pulled the soundless hilt apart again, and checked the speaker connections to the NB board. Look fine. Popped out the speaker itself, it looks fine. No damage anywhere, no loose wires. Re-assembled it for one last test, now it doesn't even try to make sound. Nada.

LED works fine, turns on, flickers, turns off, etc. Should I order a new speaker, or is this problem deeper? Seems odd that it would work super one second, then just...crap out.

Thanks for any ideas!