Hallo everyone,
As the title said this is gonna be my first saber. I kept things extremely simple. No soundboard (I will buy one later if this try will be a success XD) and pre wired parts.
Just want to ask you if everything it's okay.
Note: there are two "Rebel Star LED & MHS Heatsink Modules" one RED and another one BLUE 'cause till I'm a youngling I have to use the blue saber. I will change it later on.
Here's the list.
- MHS ribbed extension v-grooved
- Screw on LED blade holder style 23
- 3" Fluted double female threaded connector
- MHS choke style 1 short
- Machine recessed 16mm AV switch hole
Electronics:
- MWS BuckPuck
- 2 x Rebel Star LED & MHS Heatsink Module (RED & BLUE)
- Rebel Star LED & MHS Heatsink Module
- MWS Long Latching 16mm AV Switch - Black
- MWS Recharge Port
- 7.4v Li-ion 1050mAh 14650 Battery Pack (I can't ship batteries to my country so I will not buy this from TCSS. Just wanted to know if this is okay and I will search for the same battery here).
Blade:
- LED "TCSS style" Battle blade 1" OD (36 inches)
- 10-32 x 1/4" set screw
Thank you for your replay.
Wynner
Bookmarks