-
Force Aware
I put the drive adjust back up to full (1023) and it didn't change the brightness of the red die. In fact, at full power I can't run the cyan combo. It trips the NB and shuts it down.
The red die has too much resistance. I calculated it at 3.7 volts instead of 3.45 V which it's getting. Its got 2 ohm 2 watt resistance right now and only needs 1.2 ohms 1 watt. Hopefully swapping out those resistors will fix the orange and purple colors.
-
Force Aware
-
Force Aware
Thanks! I'll definitely do that. I'm certainly not done with the exterior, just wanted to get the wiring done.
-
Perforated tube?
I like it. Cool work.
Can I ask where you found or bought the perforated metal? Is it a tube or a curved plate? I've been scouring the internet for some to use as an 18650 battery shroud. Ideally it would be a tube just a tad larger in diameter than an 18650. Or a sheet I can role into that shape. I'll settle for it being the diameter to fit the ID if my Graflex to hide the battery and NB board. It's been hard to find anywhere I could order in less than a 1 ton order.
Thanks
Al
-
-
Jedi Council Member
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
Force Aware
-
Force Aware
-
Force Aware
wow the blade plug is awesome, great idea
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks