Originally Posted by
GFJedi
Your battery and charger selections are a little confusing. The only "loose" 18650 batteries in the store are TrustFire 2400mAh 2-packs or the Panasonic 3400mAh single packs (protected or unprotected) that work with the single charger. There is no "loose" 18650 2600mAh batteries that will work with that charger.
Otherwise there is the MWS compatible 3.7v 2600mAh protected battery module (with JST connector, im assuming you mean this one), or the MWS Panasonic 3.7v 3400mAh protected pack with JST connector. These 2 options are intended for internal use with a recharge port and the smart charger, and not compatible with the single charger.
If you are intending to use a loose battery cell with that single charger, please keep in mind the ones with the JST connector will not be compatible. Also, you will need to source a 18650 battery holder with leads to incorporate into your electronics. Keep in mind that "protected" cells are slightly longer than unprotected ones due to the PCB that is located at the end of the cell, and not all 18650 battery holders are made the same, some are a tighter fit than others, and placing a protected cell in one of those holders, it may be nearly impossible to remove without damaging something.
Bookmarks