Thanks for the quick reply
In my reading of the forums I have seen your posts and read your links, the basic guide was really useful
Wiring diagram wise I have no idea yet, as it's kinda what I'm trying to find out.
But kit wise as follows: -
PC 2.0 card
Li-Po battery
RGB Tri-Rebel Star (with each color individually switchable to give the various colors)
Recharge port with kill key
Possibly a crystal chamber if i can work out a way to construct one
I though about using something like 3 x Activation box style 6 equidistant around the hilt for the three LED switches with a separate overall power switch.
I have no idea how much space the PC 2.0 and battery will take up, or if I can run 3 LED's off the one BuckPuck, I know the blue and green require 1000mA and the red needs 700mA, so an additional resistor would be needed if that is at all possible, or would I need 1 BuckPuck for the blue, green and one for the red.
As a side note I live in the UK so forgetting something on my order would mean a longish wait to get the missing bit, as well as the high shipping cost, so careful planning is needed
Thanks again
Bookmarks