2 New Sabers Parts List (Noob as well)

[SilverLiquid]

Hey guys, here's my shopping list to make the following sabers. I'm looking for something very basic that will light up but also be able to upgrade easily in the future. What do you think?
Thanks for your help in advanced!

SaberBuilder_render1.jpg
Rebel Star LED & MHS Heatsink Module Luxeon Rebel Star (Green)
SPST Latching Guarded switch with silver button
LED "TCSS style" Battle blade 1" OD (36 inches) ** Clear Bullet Shaped
Hilt style 2 with guarded style switch hole
Screw on LED blade holder style 9
MHS choke style 3
MPS Pommel style 8

SaberBuilder_render2.jpg
Rebel Star LED & MHS Heatsink Module Luxeon Rebel Star (Blue)
SPST Latching Guarded switch with silver button
LED "TCSS style" Battle blade 1" OD (36 inches) ** Clear Bullet Shaped
7" Fluted with guarded style switch hole
Screw on LED blade holder style 13
MHS choke style 1 short
MPS Pommel style 4

2x MPS Insert style 7
2x 8-32 x 3/8" Set Screw
2x MPS Clip
2x 4AA Battery holder
2x BuckPuck 1000mA 4-wire
2x Super Lube Synthetic Grease
8-32 Tap & drill set
Tap handle
1/8" Adhesive lined heatshrink tubing

[Silver Serpent]

I don't see anything missing. Looks like you've done your homework. Should be easily upgradable in the future.

Also, just in case you weren't aware: You can get 10% off your order on May the Fourth.

[SilverLiquid]

Great, thanks!!! Very excited to get this project underway.

Yeah, I'll be placing the other once the discount is available.

[Johannes Huber]

Welcome to the most dangerously addictive of hobbies (Really, I can stop anytime. No seriously, why are you all laughing?) Look forward to seeing these come together. Keep us posted.

[Forgetful Jedi Knight]

Welcome to the most dangerously addictive of hobbies (Really, I can stop anytime. No seriously, why are you all laughing?) Look forward to seeing these come together. Keep us posted.

That statement is probably why...

[SilverLiquid]

Haha, I can tell this will get addicting! Thanks!

[SilverLiquid]

Got it all up and running! Piece of cake! My only
Question is, if I'm using the regular screw to hold the blade in, should it go in all the way so it's flush? Do I need to cut the screw or go buy a shorter one?

[Silver Serpent]

Tighten the screw *just* until it is snug. That's it. Any more than that and you'll eventually risk stripping out the threads on your saber.

If it's sticking out further than you'd like, you can either get a shorter screw or cut it down a bit. Either way is fine. I personally prefer to just get a new screw, since I'm good at buggering up the threads when I'm cutting them.

[SilverLiquid]

Will do a Depot run later and see what they have. Thanks!

[SilverLiquid]

Hey guys! Got everything going but now my heart (and saber) is calling for some sound!

Is there a thread here with a parts list for the PC 2.0? I can't seem to find anything with specifics.