Hello all new to the world of saber building. I am having an issue with my Nano Biscotti. I have it wired up as outlined in the user guide and there are no solder bridges. When I power up withough the Main LED connected the sound works great, Initial boot, power on, saber hum, swing, clash and power down all work as well as the accent LED. When I connect the main LED,then power up, the sound shuts off after a second, the main LED remains on for another second then the card reboots. I am positive that my micro SD card is ready to go. Any help would be greatly apreciated.

Nano Biscotti
Li-Ion 18500 3.7V 1400mAh
Luxeon Rebel Star Green 161lm @ 700mA 3.4v - Run at 1000mA
2W Bass Speaker
momentary switch

nano biscotti wiring close.jpg