Here is my newest build. It was a custom job for a friend of mine. She is a huge harley davidson fan & wanted a lightsaber with a harley theme. If you notice there are no switches. They are all build into the handle bar and break mechanism.
Here are the specs:
7.4v Li-ion 1050mAh 14650 Battery Pack
Igniter R2 and Tru-color boards
BGRW led engin
Kill key under the sound vent
8 accent leds hidden under the seam of the leather grip
2W bass speaker
Aluminum tube, hand cut.
blade holder style 3
sink tube adapter
I could not find a desent way to hold the break mechanism in place, so i had to hand build the clamp using a sheet of steel. I then bent it around the tube and cut it to fit. Finised off by powder coating it black.
The speaker is also side mounted right under the LED heatsink, just above the sound vents. So its out of sight.
The SD card is accessable right behind the break. So you dont have to take it appart to get to the sd card.
IMG_9535.jpgIMG_9536.jpgIMG_9537.jpgIMG_9539.jpg
Bookmarks