Thanks Boj-Vaati Mau!
I think you're right. Im going to go that route. Yes I'm going to use the accent lights.
Thanks for the tips.
-Ish
Thanks Boj-Vaati Mau!
I think you're right. Im going to go that route. Yes I'm going to use the accent lights.
Thanks for the tips.
-Ish
Last edited by Ish; 01-18-2013 at 11:45 AM.
The Force is strong.
What kind of resistors do i need for
16mm Anti Vandal Latching Green Ring Switch
Red LED indicator
Green LED indicator
Power Xtender™ 2.0
I don't think I need one for the LED Engin.
The Force is strong.
Learn Ohm's laws you shouldOriginally Posted by Ish
Use the search button, find the answers you seek, you will.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Here are the basic renders for your build off of the MHS Builder:
Ish's composite.jpg
Knowledge must be balanced by Practice.
Practice must be balanced by Experience.
Through Knowledge, Practice, and Experience
we gain Wisdom.
-Boj-Vaati Mau
Jedi Sentinel, Jar'Kai practitioner,
and Instctor at Strafe Plains Temple
Saber Guild: Strafe Plains Temple
The Rebel Legion
image.jpg
This is what I have been working on. Let me know what u think.
The Force is strong.
Ok I got it, but does the board provides to power the accent LEDs is 3.3V. Or 5.5 to 11 V / 2.5A ?Learn Ohm's laws you should
Use the search button, find the answers you seek, you will.
The Force is strong.
Not bad at all. You will have quite a bit of Dremel-Fu ahead of you.
Just give thought to how and where you're going to connect that to the main hilt.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Hey guys! Hope everyone is have a good weekend. So this is what I got for the resistors. Let me know if I'm off and I'm having a hard time with the power xterder resistor. If there's any input let me know. Thanks guys
16mm Anti Vandal Latching Green Ring Switch = 1 ohms, 1/8W
Red LED indicator = 68ohms, 1/8W
Green LED indicator = 68ohms, 1/8W
Power Xtender™ 2.0 = ?
The Force is strong.
Depends on what color(s) you are going to use for FoC. Important, that information is.
To answer your other question the accent pads are 3.3V, 20 mAh.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Green LEDS on as the main blade, Blue flash for clash, and Red flash for blasters.
The Force is strong.
Reply With Quote
Bookmarks