What kind of LED are you trying to run?
What kind of LED are you trying to run?
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Single red lux
** After some "light" reading, should I be using a 700mah buck puck instead of the 1000mah because I am using a red LED (due to the red amperage)?
*** Side note, did some aging to my hilt while taking a knee and rethinking, will post pictures when complete.
Last edited by Darth Sledge; 02-04-2019 at 04:34 AM.
Problem Solved, 700ma Buckpuck and some more troubleshooting required. With the red LED powered by all LED landings it would not work properly, running off of just one now and all is "purring" beautifully.20190216_234224.jpg thank you.
The only thing necessary for the triumph of evil is for good men to do nothing.
-Sir Edmund Burke
Reply With Quote
Bookmarks