My parts list, pretty long

**sev95** · 09-07-2011, 08:06 AM

My parts list:

2" Double female threaded connector
Double ended male threaded connector style 1
MHS ribbed extension
Screw on LED blade holder style 18 "new style"
3" Double female threaded connector
MPS Pommel style 10
MPS Clip
MPS Insert style 7
MHS Sleeve material
8-32 x 3/8" Set Screw
Activation box style 9
DPDT Latching red illuminated switch (black style)
2.1mm Power Jack
2.1mm plug adapter for smart charger
3.7V-14.8V Li-Ion Smart charger
Kill plug style 1
4-40 Button Head
9/64" Allen wrench
8-32 x 3/8" socket head screw
Black machined button for Covertec clip
Covertec Clip
Luxeon Rebel Star red
Luxeon Rebel Lens Holder
Luxeon Collimator Lens 8.7 deg viewing angle
BuckPuck 700mA 4-wire
Star thermal tape pad
2 Wire quick connector
1/8" Heatshrink tubing (1 foot)
Dual 18 gauge wire (2-3 feet)
8-32 Tap & drill set
4-40 Tap & drill set
Tap handle
Premium Speaker
MHS speaker mount V3
Obsidian Soundboard with Darkstar Sound font

Tell me if I am missing anything besides batteries (I need to figure how much voltage I need) because I know I am going to be using Li-ions. Here is a pic of how the MHS pieces are going to line up:
1 capture dark red wirten.jpg

Thanks again for your help

Sev95

**const** · 09-10-2011, 08:33 AM

I think you'd be happier with a Seoul P4 red rather than a lux. I could be wrong though

**Rafalema** · 09-10-2011, 11:24 AM

You absolutely steadfast on getting the Obsidian?

Otherwise than that, for me, your parts list looks good to go.
Have fun

**sev95** · 09-10-2011, 11:56 AM

Yeah cuz its (the obsidian) easier to change the fonts and easier to wire up. Also I want a red rebel cuz I've heard that they are brighter than P4s. Also I forgot to put a 4-40 thread tap and drill set into the list. And I need a drill bit for both the recharge port hole and the AV switch hole. What size drill bit should I use for the port and AV switch?