Originally Posted by
Skottsaber
It would be relatively easy to do.
If you were to completely redesign the internal electronics.
First you remove everything, battery pack, soundboard, blade.
Then you make your cuts, build the chamber and secure it in the hilt.
You will obviously keep the stock switch, so just cut the wires for it off from the soundboard. Add an LED underneath the crystal and wire it to say a 4 AAA battery pack with appropriate resistor.
You now have a saber with a crystal chamber that lights with the switch. That is what I gather from your post you are trying to do, not keep the sound and illuminated blade. Correct me if I'm wrong.
Bookmarks