a question about making things fit

[hrdwarhax]

so the contact between the aluminum and copper in the threaded area will be enough, or the steel wont affect it that much

[xl97]

its fine..

your not changing/doing anything different really.

its just like you had a THICKER heatsink to take up the slack/room from the trim ring...

[Jedi-Loreen]

Since the heat sink is sandwiched between the blade holder and hilt/extension/choke, that contact is already enough to turn the whole hilt into a giant heat sink.

That's the way the MHS system was designed.

[hrdwarhax]

ok got it, now any answer about the chokes on a saber staff? does it look ok?

[Rafalema]

If it looks ok to you, then why not?

[hrdwarhax]

lol thats the problem, idk if it looks ok or not :P

[xl97]

build one in the MHS builder..and check it out..

[hrdwarhax]

yea ive been doing that but untill now i havnt found anything i liked, thanks tho. at first i was going to just use blank extensions and drill my own holes, but i didnt like the look of it, so i used a main body with a choke and i think its good. only question now is if it will be long enough for batttery and sound in each half.