PVC Saber Project Parts List

Parts List
Electronics Parts
-Build Your Own Seoul P4 Electronics Kit
--4AAA battery holder
--Seoul P4 (White)
--Collimator Lens 5’ viewing angle
--3.3ohm 5w resistor
--Push on/push off switch with black button

Miscellaneous Parts
-32” LED “TCSS style” Battle blade 1”
-Hex screw
-Thumb screw

Inspired by Jay-gon's PVC Hilts, I am going to start designing and building a series of hilts that are seen through the Expanded Universe. At first, I plan to make only lit sabers, but soon I plan to include sound with them too.

My first project is going to be an Imperial Knight Saber. I already have the hilt designed, I just need to know if I am missing anything from the parts list for the LED, specifically if I need some form of a heatsink. If I do need one, can someone give me any suggestions on where to get one/how to make one?

For a heatsink in a PVC saber, check out this thread: http://forums.thecustomsabershop.com...-for-PVC-hilts.

3/4" copper pipe endcap works like a charm.

Quote:

---

Originally Posted by Silver Serpent

3/4" copper pipe endcap works like a charm.

---

Yeah they do, you can use them for just about any 3 wat. led, and with a little modification (1" section of 3/4" id. copper pipe, and 1" section of 3/4" aluminum rod along with the endcap. Wrap the whole assembly with aluminum plumbers tape to hold everything together) you can run a 10 wat. led with no problems